Clean room anti-static bag related applications

Clean room anti-static bag introduce

electronics industry mainly in the form of electrostatic hazards caused by electrostatic discharge and potential catastrophic failure of components fail, thus resulting in a decline or failure of the whole performance. Therefore, the main purpose of electrostatic protection and control should be to control electrostatic discharge, that is, to prevent the occurrence of electrostatic discharge or reduce the energy of electrostatic discharge below the damage threshold of all sensitive devices.
In principle, static electricity protection should be controlled from the generation of static electricity and the dissipation of controlled static electricity. Controlling the generation of static electricity is mainly to control the selection of materials in the process and process; controlling the dissipation of static electricity is mainly to quickly and safely discharge the static electricity. Putting and neutralizing; the result of the joint action between the two may make the electrostatic level not exceed the safety limit and achieve the purpose of electrostatic protection. The following describes the types and characteristics of several anti-static bags in the electronics industry.
1) anti-static shielding sealed polyethylene bags

is imported from Germany and antistatic agent, blow molded by special machinery. It is easy to pack and close with your fingers. It can reduce complicated packaging procedures for you. It can be used for electronic originals, PC boards, etc.
2) Surface resistance value 109-1011Ω
l:LANG="EN-US">2)L:LANG="EN-US">l:LANG="EN-US">PE red anti-static bag This anti-static bag is the best packaging material for printed circuit boards , make the static electricity of the printed circuit board be released reliably and avoid damage. Technical specifications are as follows: in line with l:LANG="EN-US">MIL-B-81705B; internal and external surface resistance l:LANG="EN-US">103~≤1011 Ω; electrostatic release time l:LANG="EN-US "><2seconds.
3)

antistatic bags can shield electromagnetic waves to the plastic, to use an antistatic agent metallized plastic, has a good shielding effect. Surface resistance: 106Ω-109Ω

4) Anti-static bubble bags antistatic

air bubbles can prevent products from sheet handling and transport due to collision or damage caused by static electricity, this static bags suitable for packaging of sensitive electronic products.

5) Anti-static and moisture-proof bag
With anti-static, moisture-proof features. The inner and outer layers of the anti-static moisture-proof bag are composed of transparent anti-static materials, and the middle layer is an aluminum foil with good barrier and conductivity. Therefore, it has good anti-static, moisture-proof and electromagnetic shielding properties and has a silvery white appearance. It is mainly used in the electrostatic sensitive, and at the same time, it needs the packaging of electronic products that prevent moisture and electromagnetic interference.